Plumbing SOS: Vital Tools to Maintain Useful for Unforeseen Water Woes
Plumbing SOS: Vital Tools to Maintain Useful for Unforeseen Water Woes
Blog Article
Were you hunting for help and advice around Plumbing Tools You Should Keep in Your Tool Kit?
![5 plumbing tools each home should have](https://1629680186.rsc.cdn77.org/wp-content/uploads/2020/12/Plumbing-repair-tools-underneath-a-kitchen-sink.jpg)
Homeowners need to be equipped for plumbing emergencies in case of sudden problems with their plumbing fixtures. This perhaps might be a broken pipe, therefore, causing leaks, or any of the other common plumbing emergencies. It is therefore necessary to have some basic plumbing tools. Using the best plumbing tools will give you the required results and of course, makes simple DIY plumbing repairs possible. You might not need these tools right away, but they will prove useful at some point. And you don’t need to have it all after all you’re not a professional plumber. However, there are some basic tools you should always have in your home. Here are 5 of such plumbing equipment you may find helpful at some point.
Teflon tape:
This is also commonly called plumber's tape. It is used to tightly seal pile joints and fitting. The tapes are in rolls cut to specific sizes and widths. It is an impenetrable seal and because of this, it can be used to hold off leaks till professional help arrives.
A basin wrench:
This is another tool that should be in every home. When doing plumbing repairs, it may be necessary to loosen up bolts and sink plumbing fixtures. The basin wrench makes this possible and is also used to tighten nuts as well. This wrench has a head that pivots at the back and front. This helps to reach smaller nuts or hold the faucet knobs and pipes.
Pliers:
The type of pliers recommended for plumbing is the tongue-and-groove pliers. They are used to tighten and loosen nuts and bolts. They can also be manipulated to hold nuts and bolts in place and use to hold and pick items. Pliers are very valuable tools for DIY plumbers.
Auger:
This is also known as a drain snake and is used for clearing drain clogs. This tool is inserted into blocked drains to pull out clogs and gunk from the drain. You put it in the drain and twist it to break clogs into tinier bits for easy cleaning.
Plunger:
Plunger is a very good tool for resolving plumbing issues. It is used to clear clogs in toilets, kitchen sinks, and other drains in your home. There are different types of plungers for handling different types of drain clogs so you should have different types and sizes of plunger depending on the one that fits your drains. There are two main types of plunger: the flange and the cup. Each of these has its specific applications for clearing up drain clogs.
Conclusion
It's wise to have these tools in the home. However, we should not undermine the fact that you might not have all of them or be able to use them for all likely plumbing issues that may occur. In this case, go for the most optimal thing which is a plumber's number. This is a sure backup that works every time especially when it a reliable emergency plumber that will respond promptly. Get a reliable plumbing technician’s number now so you can call for help when you need it.
PLUMBER
Adjustable Wrench
Designed to have a firm grip, an adjustable wrench is an essential tool because it has been perfectly designed to be an ideal match for plumbing parts that are hexagonal and have similarly shaped nuts. As per expert plumber in Fort Worth, TX it is great for using on supply lines, compression fittings, and other repairs. Two sizes are available of this tool; six inches and a ten-inch wrench.
Pipe Wrench
Heavier than an adjustable wrench, a pipe wrench is also used for the purpose of tightening and loosening fittings and nuts. To deal with an issue in the plumbing you generally require the use of two pipe wrenches so that one can be used to hold and other can be used for turning. One recommendation made by the plumber in Fort Worth, TX to everyone to avoid any sort of damage to the finishing of your fixture is to make sure that you wrap the wrench’s jaw in cloth.
Basin Wrench
A basin wrench looks like an apparatus with a clamp-like end because it has a long shaft and a swivel. Because of this design, it can easily reach deep, narrow spaces behind the sinks and is commonly used to loosen and tighten nuts and bolts on sink faucets. It is a necessary staple that should be in your toolbox.
Metal File
When you cut a pipe or any surface it tends to become rough from that place from where it has been cut. This could be dangerous as anyone could get hurt and also it would create an issue when you try to fix some other pipe to this place. Therefore a metal file is necessary and although there are different sizes available at retail stores and shops, the plumber in Fort Worth, TX suggests you have these two always in your plumbing box; a rat-tail file which is round and tapered, and a half-round file which has rounded and flat surfaces.
Thread Seal Tape
To help prevent leaks at joint connections that are threaded a thread seal tape also referred to as the plumber’s tape or PTFE tape, is the right thing to use. It can be used on a variety of plumbing projects like on the water line connections or the shower heads.
![Plumbing Tools You Should Keep in Your Tool Kit](https://www.warnerservice.com/hubfs/wrench.jpg)
Do you really like more info about Basic Plumbing Tools You Should Have on Hand? Post feedback further down. We will be pleased to listen to your views about this blog. We hope to see you back again soon. Kindly take the opportunity to promote this article if you enjoyed reading it. Bless you for your time. Kindly come visit our blog back soon.
Browse Our Site Report this page